586 Willard Street Quincy, MA 02169 617-996-2277
469ci 650hp - Mini tubs - House of Kolor paint

1965

Mercury

Comet

Cyclone

256

Automatic

5H27A509631

KC

469ci

Vinyl

House of Kolor Brandywine

RWD

Antique

MA


Video



Vehicle Options



Vehicle Description



This 1965 Mercury Comet Cyclone is the result of an A/FX dragster-inspired custom build which was conducted by its previous owner in partnership with his brother, the proprietor of Extreme Machine Unlimited in Walpole, Massachusetts between 2012-2014. The body is finished in House of Kolor Brandywine Metallic over a black interior, and power is from a bored and stroked 469ci FE-series V8 paired with a modified C6 automatic transmission from Monster Transmission. Other details include mini-tubs, chassis reinforcements, a roll bar, American Rebel Machine wheels, and more. I acquired the car in 2016, and it was featured in the August 2017 issue of Car Craft. 
The Comet was based on a stretched variant of the Ford Falcon chassis for 1965, with Cyclone trim available only for the two-door hardtop variant. This example was acquired by its previous owner as a complete vehicle, and modified with welded frame connectors and tubbed rear bodywork by DMC Racing in Massachusetts. Prep and paintwork were performed by Competition Specialties in Walpole,MA, who finished the car in a silver base coat and House of Kolor Brandywine Metallic top coats with black accents as well as argent silver bumpers and mesh brake cooling ducts.  A walk around video here- https://youtu.be/68obtnUvyJ0

The Ford FE-series V8 was bored and stroked to 469 cubic inches and fitted with a SCAT 4340 forged crankshaft, Eagle forged H-beam connecting rods, 11.25:1 JE pistons, a Cam Motion camshaft, and roller lifters. Custom-machined aluminum Edelbrock RPM cylinder heads are fitted with Harland Sharp roller rockers and Ferrea valves. Twin 650cfm Edelbrock four-barrel carburetors feed air and fuel through an Air-Gap intake manifold. A Concept One pulley system and a custom Ron Davis radiator with twin SPAL fans are also fitted.
American Rebel Machine wheels are mounted with 165-width Vredestein Sprint Classic tires up front and Mickey Thompson ET Street 295s tucked beneath the rear fenders. Suspension modifications include dual-adjustable coilovers from Total Control Products up front and QAI adjustable coilovers with monoleaf springs and CalTracs traction bars at the rear. Pictures showing the car before and during the work can be seen in the gallery below, along with close-ups detailing the resulting finish. A walk-around video has also been provided. https://youtu.be/68obtnUvyJ0

Black vinyl covers low-backed bucket seats, with a matching bench in the rear. A four-point roll bar was fabricated by DMC Racing and anchors Simpson four-point harnesses.

The three-spoke steering wheel frames a suite of AutoMeter gauges in a custom dash. The digital odometer shows 246 miles, with approximately 1,000 driven since the completion of the build. Gears are selected using a Kwik Shift 1 shifter from Precision Performance Products.

The battery has been moved to the trunk and is housed in an aluminum box.

The rocker assemblies were just rebuilt by Harland Sharp and valve cover gaskets replaced within the last 40 miles, and an oil change using Brad Penn 20w50 was performed within the last 200 miles.

The C6 automatic transmission was modified by Monster Transmission and features a reverse manual valve body. A Ford 9? rear end with Strange 31-spline axles turns the rear wheels. The 3" stainless steel dual exhaust system features a center crossover and Borla mufflers.

Well over $100k+ invested, fully sorted and just serviced.



Visit Foreign MotorCars, Inc. online at foreignmotorcars.com to see more pictures of this vehicle or call us at 617-996-2277 today to schedule your appointment.

Vehicle Inquiry for 1965 Mercury Comet Cyclone


Inquiry Photo

1965

Mercury

Comet

Cyclone

256

Automatic

5H27A509631

KC

469ci

Vinyl

House of Kolor Brandywine

RWD

Antique

MA

Share with a Friend


Message: Thought you might be interested in this 1965 Mercury Comet.

469ci 650hp - Mini tubs - House of Kolor paint

1965 Mercury Comet Cyclone

Mercury Comet  1965
$46,000
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo
Photo

1965

Mercury

Comet

Cyclone

256

Automatic

5H27A509631

KC

469ci

Vinyl

House of Kolor Brandywine

RWD

Antique

MA

 


This 1965 Mercury Comet Cyclone is the result of an A/FX dragster-inspired custom build which was conducted by its previous owner in partnership with his brother, the proprietor of Extreme Machine Unlimited in Walpole, Massachusetts between 2012-2014. The body is finished in House of Kolor Brandywine Metallic over a black interior, and power is from a bored and stroked 469ci FE-series V8 paired with a modified C6 automatic transmission from Monster Transmission. Other details include mini-tubs, chassis reinforcements, a roll bar, American Rebel Machine wheels, and more. I acquired the car in 2016, and it was featured in the August 2017 issue of Car Craft. 
The Comet was based on a stretched variant of the Ford Falcon chassis for 1965, with Cyclone trim available only for the two-door hardtop variant. This example was acquired by its previous owner as a complete vehicle, and modified with welded frame connectors and tubbed rear bodywork by DMC Racing in Massachusetts. Prep and paintwork were performed by Competition Specialties in Walpole,MA, who finished the car in a silver base coat and House of Kolor Brandywine Metallic top coats with black accents as well as argent silver bumpers and mesh brake cooling ducts.  A walk around video here- https://youtu.be/68obtnUvyJ0

The Ford FE-series V8 was bored and stroked to 469 cubic inches and fitted with a SCAT 4340 forged crankshaft, Eagle forged H-beam connecting rods, 11.25:1 JE pistons, a Cam Motion camshaft, and roller lifters. Custom-machined aluminum Edelbrock RPM cylinder heads are fitted with Harland Sharp roller rockers and Ferrea valves. Twin 650cfm Edelbrock four-barrel carburetors feed air and fuel through an Air-Gap intake manifold. A Concept One pulley system and a custom Ron Davis radiator with twin SPAL fans are also fitted.
American Rebel Machine wheels are mounted with 165-width Vredestein Sprint Classic tires up front and Mickey Thompson ET Street 295s tucked beneath the rear fenders. Suspension modifications include dual-adjustable coilovers from Total Control Products up front and QAI adjustable coilovers with monoleaf springs and CalTracs traction bars at the rear. Pictures showing the car before and during the work can be seen in the gallery below, along with close-ups detailing the resulting finish. A walk-around video has also been provided. https://youtu.be/68obtnUvyJ0

Black vinyl covers low-backed bucket seats, with a matching bench in the rear. A four-point roll bar was fabricated by DMC Racing and anchors Simpson four-point harnesses.

The three-spoke steering wheel frames a suite of AutoMeter gauges in a custom dash. The digital odometer shows 246 miles, with approximately 1,000 driven since the completion of the build. Gears are selected using a Kwik Shift 1 shifter from Precision Performance Products.

The battery has been moved to the trunk and is housed in an aluminum box.

The rocker assemblies were just rebuilt by Harland Sharp and valve cover gaskets replaced within the last 40 miles, and an oil change using Brad Penn 20w50 was performed within the last 200 miles.

The C6 automatic transmission was modified by Monster Transmission and features a reverse manual valve body. A Ford 9? rear end with Strange 31-spline axles turns the rear wheels. The 3" stainless steel dual exhaust system features a center crossover and Borla mufflers.

Well over $100k+ invested, fully sorted and just serviced.



Visit Foreign MotorCars, Inc. online at foreignmotorcars.com to see more pictures of this vehicle or call us at 617-996-2277 today to schedule your appointment.

Foreign Motorcars, Inc.
586 Willard Street
Quincy, MA 02169
Kyle Chadwick
617-996-2277
Message: Thought you might be interested in this 1965 Mercury Comet.

Share to Social Media